A cellular base station antenna configuration for variable coverage

Abdul-Rahman Shakeeb, K. H. Sayidmarie

Abstract


The field coverage offered by the base station antenna in GSM systems influences the reception and interference performances. The coverage can be varied by scanning the mainbeam direction or varying the shape of the radiation pattern. In cellular system applications, a simple technique is desirable to achieve this goal. A simple technique to vary the coverage of cellular base station is investigated. The technique uses two conventional antennas tilted by a certain angle and fed by the same signal but at variable amplitudes. It is demonstrated that the field across one half of the covered sector can be gradually increased while that at the other half is reduced by varying the excitations of the two antenna elements. This can be deployed in a simple electronic means in response to the changing scenario rather readjusting the direction of the base station antenna.

Keywords


amplitude-only scanning; base station coverage; mobile systems; reconfigurable antennas; scanned arrays; switched beam antennas;

Full Text:

PDF


DOI: http://doi.org/10.11591/ijece.v9i3.pp1887-1893
Total views : 222 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.